Sharpening Woodcarving V-Tools

My first foray into carving was way back in early grade school. Dad taught me to carve a simple Scotty dog from a bar of Ivory soap with a pen knife. No V-tool was needed for that work.

By the way, this is a simple beginner carving project. The parts of the dog are blocky, the soap easy to carve, and even a simple blocky carving gives a sense of accomplishment. Be careful of breaking off the tail.

Somewhere in the middle of Boy Scout years, carving a wooden chain was intriguing for a while (“a while” means 5 or 6 inches of chain). No V-tool was needed for that work.

More recently, carving the scrolls on the stems for the Fiddlehead canoe brought carving back to the forefront. No V-tool was needed for that work either.

photo of botched up v-toolThe small set of inexpensive Ramelson “Beginner” carving tools purchased for the Fiddlehead work included a V-tool, but it wasn’t needed for the project. Besides, it was cast lopsided with one side wall thicker than the other. Not long after taking up the most recent interest in carving, I decided to fix that V-tool. The first photo shows the result. With it unsuccessfully “fixed” … through many grindings, it is now reground to be a very short gouge with something like a #5 radius.

photo of several good v-toolsThere’s a BETTER solution! Learn to sharpen a V-tool correctly. Chris Pye, a traditional woodcarver once published a collection of eBooks he called “Slipstones.” One of those was a 102 page book titled “Select and Sharpen Your V-Tool.” Holy pages Batman! 102 pages???! Yes, it’s a very comprehensive tome, spending a lot of time describing v-tools and offering advice on how to select the one(s) you might want.

The part of the book about sharpening clarifies the “secret.” In short, it advises one to think of a V-tool simply as two chisels joined at the keel. Sharpen each chisel independently, but to the same angle, and “voila!” you have a sharp V-tool. If that brief explanation isn’t enough, there are about 50 pages in the eBook to explain the details.

Chris recently upgraded his web site, and in the process the eBooks slid into that deep dark spot full of lost stuff from reworked web sites. Chris has also started a new “Woodcarving Workshops” web site offering excellent video instruction for a very wide range of woodcarving topics. There he offers professional instruction (for a reasonable fee) as series of very concise and expertly produced videos. Take a look.

I asked Chris about the missing eBooks. He answered that he’ll bring them back eventually, but for now suggested that I forward on to those who might want them any that I have. So, for a limited time, get your copy of Chris Pye’s “Select and Sharpen Your V-Tool” ebook.


9 Responses to “Sharpening Woodcarving V-Tools”

  1. Jim Marsh Says:

    Thanks for posting the e-book. I was recently at his site and could not download so I am grateful to you for the explanation and the offer.

    Thanks again, Jim

  2. Ken Dispoto Says:

    I also want to thank you for this enlightening information.
    I have been struggling in this area for quite some time – I hope this sets me straight.

  3. how to get rich Says:

    I visited many websites but the audio feature for audio songs
    existing at this web page is really wonderful.

    Here is my weblog: how to get rich

  4. how to make money online Says:

    A person essentially assist to make critically posts I would state.

    That is the very first time I frequented your website page
    and thus far? I amazed with the analysis you made to create this particular submit extraordinary.
    Great job!

    Visit my web blog; how to make money online

  5. wake up now Says:

    Hello! Do you know if they make any plugins
    to help with Search Engine Optimization? I’m trying to get
    my blog to rank for some targeted keywords but I’m not seeing very good
    success. If you know of any please share. Many thanks!

    Check out my blog; wake up now

  6. usana Says:

    I am regular visitor, how are you everybody? This piece of writing posted
    at this web page is actually nice.

    Here is my web page :: usana

  7. bitcoin Says:

    I will immediately clutch your rss as I can’t to
    find your email subscription link or newsletter service.

    Do you’ve any? Please allow me understand in order that I may just subscribe.
    Thanks.

    My site; bitcoin

  8. newsvine.com Says:

    This is my very first time to visit here.
    I found numerous entertaining stuff in your blog, specifically in
    its discussion. I guess I am not the only one having all the
    enjoyment here! Keep up the superb work.

    My homepage; genf20 plus (newsvine.com)

  9. http://bestacnetreatment1.blog.fc2.com/blog-entry-1.html Says:

    Wow! This might be one of the most helpful blogs we’ve ever arrive across about this subject.Excellent.
    I’m also an expert in this topic therefore I can
    understand your effort.

    My webpage: acne treatment (http://bestacnetreatment1.blog.fc2.com/blog-entry-1.html)