Glue is something that I try to avoid as much as possible. Carving rarely needs glue, but box making does and so does the most recent project (more on that in another post). For most work, I use Titebond glues. The glues work well, but I really dislike the bottles. How does this work for you? Pick up the bottle, turn over and shake 1, 2, 3 times to get some glue near the tip. Then, pull open the tip … or most likely wrestle with opening the tip. After two good yanks, the tip is still stuck. So go find pliers. Then, find the slot in the nozzle blocked. Scrape it out; danged stuff really sticks on the cap almost as well as the wood. Phew, finally open. Squeeze and use. Clean the tip off this time before closing. One big PITA, and that’s NOT pita bread.
Being the cook, and grocery shopper, I’m seeing more and more products being sold in bottles meant to be stored inverted. SOME of those bottles actually have valves built into the lids. Two notable examples are Wallmart’s Great Value brand honey, and Heinz’s tomato ketchup. Wondering how well that valve handles glue, I cleaned out the last empty honey bottle and refilled it with Titebond glue.
Wonderful!!! Pick up the bottle, flip the lid, squeeze and spread. Set the bottle back down closing the lid all in one motion. No, it doesn’t have a long pointy nozzle, but how often do you really need that type of nozzle? Tilt this bottle a bit and there’s plenty of control. It works a bazillion times better than Titebond’s bottle. What’s more, the lid’s plastic surface is super slick and doesn’t hold on to spillover glue the way Titebond’s nozzles do. What little glue gets left on the lid slides right off.
Goodbye Titebond bottles; I’m sticking with the sweet ones now.
Leave a Reply