• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Bob Easton

Chocolate powered woodworking

  • Home
  • Grinling Gibbons Tour

Jelly Side Down

February 22, 2018 by Bob Easton 3 Comments

Accidentally drop that piece of toast with jelly. The probability of landing jelly side down seems to be 0.9944.

And when a board is accidentally knocked out of the vise, what are the odds of it landing on a fragile corner?

Right: 0.9944!

photo of damaged corner

That’s too much damage for the steam iron rescue. It took only a couple of hours to make a replacement. …and would have taken only a half-turn of the vise handle to prevent it in the first place.

Gratitude: extra cherry lumber and sharp planes

Other articles in this series…

  • Regulator Clock – Done
  • Regulator Clock – Woodworking completed
  • Regulator Clock – Scratching the frames
  • Regulator Clock – Door Hinged
  • Regulator Clock – Case Dry Fitted
  • Regulator Clock – Jelly Side Down
  • Regulator Clock – Case Frames – 2
  • Regulator Clock – Glass – 2
  • Regulator Clock – Case Frames – 1
  • Regulator Clock – The Works work
  • Regulator Clock – Glass
  • Regulator Clock – Tongue & Groove planes
  • Regulator Clock – Completed Mouldings
  • Regulator Clock – Stick Mouldings
  • Regulator Clock – Plate Mouldings
  • Regulator Clock – Egg and Dart Moulding
  • Regulator Clock – Eat Dessert First
  • Regulator Clock – original description
  • Regulator Clock – Stock Prep
  • Regulator Clock – Plans for Moldings
  • Taming the Rabbet

Filed Under: Clocks, Woodworking

Regulator Clock – Case Frames – 2

February 6, 2018 by Bob Easton Leave a Comment

Gratitude: Space heater in the colder than usual winter shop

Basic frame construction is tongue and groove, as shown previously. The next step along the way is cutting the openings and making rebates for the glass.

My favorite turning saw and an Auriou rasp made quick work of cutting the openings. The more time consuming work was cutting rebates for the glass. Running a rebate plane around the interior of a curved opening isn’t practical. So, this was work mostly for bench chisels, some curved gouges, and a rebate plane.

  • photo of chopping the glass recess in a side frame
  • photo of routing the glass recess on a side frame
  • photo of 3 frames - glass recesses completed
  • photo of 3 frames after basic construction

Other articles in this series…

  • Regulator Clock – Done
  • Regulator Clock – Woodworking completed
  • Regulator Clock – Scratching the frames
  • Regulator Clock – Door Hinged
  • Regulator Clock – Case Dry Fitted
  • Regulator Clock – Jelly Side Down
  • Regulator Clock – Case Frames – 2
  • Regulator Clock – Glass – 2
  • Regulator Clock – Case Frames – 1
  • Regulator Clock – The Works work
  • Regulator Clock – Glass
  • Regulator Clock – Tongue & Groove planes
  • Regulator Clock – Completed Mouldings
  • Regulator Clock – Stick Mouldings
  • Regulator Clock – Plate Mouldings
  • Regulator Clock – Egg and Dart Moulding
  • Regulator Clock – Eat Dessert First
  • Regulator Clock – original description
  • Regulator Clock – Stock Prep
  • Regulator Clock – Plans for Moldings
  • Taming the Rabbet

Filed Under: Clocks, Woodworking

Regulator Clock – Glass – 2

February 5, 2018 by Bob Easton 6 Comments

Gratitude: being able to absorb a loss…

Back in November, I wrote about searching for a clock glass maker. The glass business has changed from a couple of decades ago. “Mom and pop” glass businesses have almost completely disappeared. Consolidation into larger (distant, remote, online) firms has hit the glass industry like many others. After a lengthy search, I thought I found one of the few remaining artisan clock glass makers. There were even good postings about his business in a clock collectors forum. After all, many of them need replacement glass for clocks they are refurbishing. I contacted the proprietor, exchanged emails several times, had a couple of telephone conversations, agreed to a price, sent him patterns and payment in advance. (That last seems to be an industry standard.) He warned that he had a long backlog. So, I patiently waited a couple of months. … …

  • The glass artisan I located in October was Tim Holder, of “Carter’s Clock Glass” in Gray, TN.
  • Tim Holder, of Gray TN, is the son of Carter Holder.
  • Carter Holder started “Carter’s Clock Glass” in Florida and established a long running and well deserved reputation.
  • Upon Carter’s death, the business split, with Carter’s brother maintaining a glass business in Florida, and Carter’s son, Tim Holder, retaining the “Carter’s Clock Glass” business name and taking it and its reputation to Gray, TN.
  • Tim Holder and I had an email exchange in October 2017 about the glass I want for this clock.
  • Tim Holder and I talked by phone in late October 2017 and agreed to details about the glass order.
  • Tim Holder cashed my check three days after I mailed it in November 2017.
  • Tim Holder’s “Carter’s Clock Glass” website disappeared sometime in the past two months.
  • Tim Holder no longer answers emails.
  • Tim Holder no longer answers phone calls.
  • Tim Holder has not produced the glass we agreed upon.
  • I inquired again at the clock collectors forum about contacting Tim Holder and learned that a couple of other people have also had problems and have lost contact with him in recent months. The forum moderators squelched further conversation, probably not wanting to stray into legal territory.
  • I inquired of Tim Holder’s uncle in Florida, that other glass business, about how to contact Tim Holder now. The answer was “We don’t communicate, and we’ve heard that some of his customers have had to call law enforcement to reclaim materials from him.”
  • screen clp - F ratingCarter’s Clock Glass now has an “F” rating by the Better Business Bureau in Knoxville, TN.
  • Carter’s Clock Glass currently has 12 complaints noted by the Better Business Bureau in Knoxville TN.
  • Six of those complaints are closed without satisfactory resolution.
  • Mine is one of them.

Yesterday, I received the following notice from the Better Business Bureau in Knoxville, TN:

Complaint ID#: 8058778
Business Name: Carter’s Clock GlassThe BBB has made several attempts to contact the business regarding the above referenced complaint. We regret to inform you that we have not received a response from the company.The BBB develops and maintains Reliability Reports on companies in our service area. This information is available to the public and is frequently used by potential customers. In the case of your complaint, the company’s failure to promptly give attention to the matter will be reflected in the report we give to consumers about them.

 

The BBB is not a legal agency and cannot force action on the part of any company. We can only suggest you seek legal counsel to further pursue this issue.

If the company has contacted you in the interim, please notify us immediately.

Sincerely, [remainder snipped]

Lessons: When dealing with a new supplier …

  • Good news in a forum is not enough.
  • Good news by email is not enough.
  • Good news by phone call is not enough.
  • Dig deeper.
  • At minimum, do more than I did: check the Better Business Bureau.

Other articles in this series…

  • Regulator Clock – Done
  • Regulator Clock – Woodworking completed
  • Regulator Clock – Scratching the frames
  • Regulator Clock – Door Hinged
  • Regulator Clock – Case Dry Fitted
  • Regulator Clock – Jelly Side Down
  • Regulator Clock – Case Frames – 2
  • Regulator Clock – Glass – 2
  • Regulator Clock – Case Frames – 1
  • Regulator Clock – The Works work
  • Regulator Clock – Glass
  • Regulator Clock – Tongue & Groove planes
  • Regulator Clock – Completed Mouldings
  • Regulator Clock – Stick Mouldings
  • Regulator Clock – Plate Mouldings
  • Regulator Clock – Egg and Dart Moulding
  • Regulator Clock – Eat Dessert First
  • Regulator Clock – original description
  • Regulator Clock – Stock Prep
  • Regulator Clock – Plans for Moldings
  • Taming the Rabbet

Filed Under: Clocks

  • « Go to Previous Page
  • Page 1
  • Interim pages omitted …
  • Page 13
  • Page 14
  • Page 15
  • Page 16
  • Page 17
  • Interim pages omitted …
  • Page 128
  • Go to Next Page »

Primary Sidebar

Footer

Recent Posts

  • New Frame Saw / Scroll Saw
  • Lamppost Sign
  • Goodbye PayPal – Goodbye Bob’s eBooks
  • Anarchist’s Workbench is Done
  • Why we keep offcuts…

Categories

  • About
  • Artwork
  • Boatbuilding
  • Boating
  • bowl carving
  • Boxmaking
  • Clocks
  • Drawings
  • eBook
  • etude
  • Eva Too
  • Eva Won
  • Fiddlehead
  • Fiddlehead model
  • Flying
  • frame saw
  • gilding
  • green woodworking
  • Grinling Gibbons
  • Guns
  • Hand tools
  • Humor
  • kerfing plane
  • Lettercarving
  • Mill Creek 13
  • Model building
  • Power tools
  • Rant
  • resawing
  • scroll saw
  • Shopmade
  • sign painting
  • Stonework
  • Swimming
  • Technology
  • The Wall
  • treadle lathe
  • Uncategorized
  • VSD
  • Woodcarving
  • Woodturning
  • Woodworking
  • workbench

Other stuff

  • About
  • Contact
  • Privacy Policy

Copyright ©2024 · Bob Easton · All Rights Reserved