• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Bob Easton

Chocolate powered woodworking

  • Home
  • Grinling Gibbons Tour

CAUTION – Oily Rags Can Kill

March 25, 2011 by Bob Easton 6 Comments

Subtitle: The Apprentice System is Not Extinct

photo of firemen fighting a fireLast August, I wrote about a tragic oily rags incident where two elderly people lost their lives. I come back to it now because a trial has been held and has a finding of “neglect.” To us woodworkers, that was obvious from early reporting.

What makes it interesting is that we’re seeing lots of old woodworking books being republished, some describing the apprenticeship system of centuries past. Well, dear readers, that system is not extinct. It is still being practiced, in some aspects, today.

In this case, a “master” joiner had left an “apprentice” to apply some oil finish to work in progress and then close up the shop. The master then went to visit another customer. The master testified that he gave complete directions to the apprentice about materials disposal, and warned him of the possibility of combustion. There seems to be some dispute on this point, according to recent news. (hint: use Google translate if you don’t read German.) The apprentice disposed of most materials properly, but swept up a few rags and put them in a dustbin inside the shop. The resulting fire quickly engulfed the shop and the living quarters above where two people failed to get out.

I found it interesting that part of the defense was the point that current teaching about the danger of materials is in the third year. This was a first year apprentice who was apparently using materials without understanding their danger.

It’s not my purpose to determine any sort of blame, but to spread these cautions so you don’t have to wait for the third year of your apprenticeship to learn them.

Please dispose of oily rags properly.

  1. Submerge them in water until you have time to collect them all, wring them out, and BURN them.
  2. OR, spread them out flat, in a non-combustable area outdoors, and let them dry completely before adding them to the refuse for pickup.

Filed Under: Woodworking

Low Cost Lightbox

January 26, 2011 by Bob Easton Leave a Comment

Pictures of woodworking and boat building projects for this blog are usually made in the workshop and show a well used workbench and other shop environs in the background. Those are suitable to the subjects. However, these backgrounds make small woodcarvings look like they’re lost in the slums. Need better!

When I was a youngster, our “dining room” doubled as Dad’s portrait studio. He was a professional photographer, professional sign artist, and a “graphic artist” highly skilled with many different media. He did his work with serious photographic equipment and real art tools long before computers brought some of these things within our reach. Dad supported a family of 6 with his art work. While I learned a tremendous amount from him, I did not pursue those professions. Yet, I do remember the backgrounds and lighting arrangements that made his portraiture work excel.

photo of the lightboxDiffused light from several sources and careful management of shadows and highlights are keys to success. Today, one can easily find lightboxes that help even us amateurs produce reasonable pictures. A lightbox is what I wanted as I started photographing carvings.

Following an ingrained do-it-yourself streak, I made my own. I had all of the components already on hand, some seeing only occassional use. So, this turned out to be a no cost lightbox. It can be easily duplicated for quite a low cost, depending on what you have around the house or shop.

The box itself is a plastic storage box that is about 22 inches by 15 inches by 12 inches deep. Wallmart calls these “56 quart storage containers,” and sells them for about 6 dollars each. The clamp lamps are the 8 inch size and are available in home centers for 6-8 dollars apiece. I used a piece of watercolor paper for the background. photo of 3.4 view of a lightboxIt is simply curled within the box, not folded, and held in place by the two little black clips.  A couple of squeeze clamps and some scrap lumber hold the clamp lamps in place. It’s all very simple. The plastic has enough milky tinting to eliminate the need for any cloth to diffuse the light. Regular (pre-ban 100w) incandescent bulbs provide more than enough light.

The box is easy to use. Set up the object within the box. Use a tripod for the camera, and be sure to set the camera’s white balance to display the colors you actually see. I sometimes use three lights, placing one in front to gain the balance of highlights and shadows that I want.

photo of a hand carved Santa ornamentphoto of lightbox being usedNow, I can produce pictures that let one pay attention to the woodcarving itself, and not the dings, dents, and stains of a well used workbench.

Go raid the storage closet, or head off to Wallmart, to get the stuff needed for a low cost / no cost lightbox.

Filed Under: Woodcarving

Kilroy Was Here

January 19, 2011 by Bob Easton 8 Comments

the famous kilroy doodleA predominant legend has it that the doodle originated with James J. Kilroy, a shipyard inspector who worked at the Bethlehem Steel Shipyard in Quincy, Massachusetts. The story says he used this mark to indicate rivets he inspected on the hulls of ships under construction. Not all of his markings were covered by paint during the hurried construction of the warships, and servicemen of all kinds found and copied the doodle everywhere.

Nearly everywhere our servicemen went during World War II, a colleague had preceeded them and left the Kilroy doodle. Of course, it showed up everywhere at home back in the states too.

It’s an easy doodle to draw, and a whimsical little character. I’ve made my own version as a shelf sitter … or better yet, as an LCD sitter that peers over the top of the computer screen.

Want one? Sometimes available on ETSY.

Update – May 2019:  All of the Kilroys have left home and I don’t currently have plans to carve more of them.  Maybe some other day.  Til then, THANKS for all who have been interested in them.

photo of kilroy carving shown with US quarter for scale photo of kilroy carving looking over the computer LCD photo of kilroy carving sitting on a mantle clock

Read more about the Kilroy legends at:
http://www.kilroywashere.org/001-Pages/01-0KilroyLegends.html
http://delontin1.wordpress.com/2008/02/21/kilroy-was-here
http://en.wikipedia.org/wiki/Kilroy_was_here
Kilroy drawing image courtesy of Patrick Tillery, KilroyWasHere.org.

Filed Under: Woodcarving

  • « Go to Previous Page
  • Page 1
  • Interim pages omitted …
  • Page 64
  • Page 65
  • Page 66
  • Page 67
  • Page 68
  • Interim pages omitted …
  • Page 129
  • Go to Next Page »

Primary Sidebar

Footer

Recent Posts

  • Sign Your Work!
  • New Frame Saw / Scroll Saw
  • Lamppost Sign
  • Goodbye PayPal – Goodbye Bob’s eBooks
  • Anarchist’s Workbench is Done

Categories

  • About
  • Artwork
  • Boatbuilding
  • Boating
  • bowl carving
  • Boxmaking
  • Clocks
  • Drawings
  • eBook
  • etude
  • Eva Too
  • Eva Won
  • Fiddlehead
  • Fiddlehead model
  • Flying
  • frame saw
  • gilding
  • green woodworking
  • Grinling Gibbons
  • Guns
  • Hand tools
  • Humor
  • kerfing plane
  • Lettercarving
  • Mill Creek 13
  • Model building
  • Power tools
  • Rant
  • resawing
  • scroll saw
  • Shopmade
  • sign painting
  • Stonework
  • Swimming
  • Technology
  • The Wall
  • treadle lathe
  • Uncategorized
  • VSD
  • Woodcarving
  • Woodturning
  • Woodworking
  • workbench

Other stuff

  • About
  • Contact
  • Privacy Policy

Copyright ©2024 · Bob Easton · All Rights Reserved